Belt-driven Centrifugal Fan
-
DF series centrifugal ventilator
Product characteristic 1. Explanation of ventilator model: 2. The common drive and installation forms of the ventilator like chart show: 3.The ventilator should working in the gas environment, which the air does not contain large amount of caustic gas; it does not contain the acidic gas, the alkalinity gas, and the ignitable gas; the dust particle matter is not bigger than under 150mg/m3. 4.The product is made of quality steel plates, then electrostatic spray coat Also it ... -
DT-E Series Centrifugal Ventilator
Explanation of vent ila tor model: 2.The DT series ventilator is, and the drive is V-belt transmission. The standard high quality bearings are used in the product, enhances the non breakdown running time. Also, the V-belt is a kind of strong V-belt, the belt cone wheel is fixed by a cone distend tight structure; the adjustment and installation are extremely convenient. 3.The ventilator is with the omni-directional stands and frame stands for instsllation,it can be devided into DT si... -
KF series centrifugal ventilator
Product characteristic 1. Explanation of ventilator model: 2. The common drive and installation forms of the ventilator like chart show ： 3.The product is made of quality steel plates, then electrostatic spray coat.Spare parts are die-formed. The final assembly is done on assembly line. Main pars are produced by advanced crafts, such as welding impeller, undercuttingshell, TOX riveting and etc. 4.The blades of impeller are BC hollow airfoil blades. They make the air blow... -
LTB Series Forward-curved Blade Double-inlet Belt-driven Centrifugal Fan
LTB series forward double air inlet belt driven centrifugal fan adopts a forward impeller with belt driven. The motor is located outside the volute and drives the fan impeller to rotate by the way of belt driven.
-
LTBH Series Backward-curved Blade Double-inlet Belt-driven Centrifugal Fan
LTBH series backward double air inlet belt driven centrifugal fan adopts a backward impeller with belt driven. The motor is located outside the volute and drives the fan impeller to rotate by the way of belt driven. The proper transmission ratio can make the rated working point of the fan match the required working condition well, improve the overall efficiency of the unit, and achieve the purpose of energy saving and environmental protection.
-
LTBM Series Forward-curved Blade Double-volute Belt-driven Centrifugal Fan
LTBM series double volute forward belt drive centrifugal fan is comprised of connected volute and impeller of two sets of double inlet centrifugal fans, with one motor used to drive two sets of impellers through belt drive at the same time. The structure greatly reduces the volume of the whole machine and can obtain a large ventilation volume in a small installation space.